The REMO-Electronics company treats the radio amateurs to a choice of products under the brand REMOfilters for their great hobby.

 

Understanding the needs of radio amateurs all over the world, REMO-Electronics manufactures unique product line including the sets of bandpass filters “BPF Standart” and “BPF-Luxury”, the “Monoblock BPF-Luxury”, the “Miniblock BPF”, the low-pass filter “LPF-1 Barrier”, high power low-pass filters “LPF-HP”, the high-pass filter “RF-BC-1.8MHz” and other items.

BPF Standart

BPF Standart

The filter “BPF Standart” is purposed to provide RF compatibility of a few simultaneously transmitted signals at amateur radio stations. This filter is targeted to daily use, to the club stations that have multiple transmitters, to individual SO2R contesters and to DX-peditions.
The filters are installed between the transceiver and power amplifier, to cut off the interference from the radio emission on another band.

BPF Luxury

The filter “BPF Luxury” is purposed to provide RF compatibility of a few simultaneously transmitted signals at amateur radio stations. This filter is targeted to the contest club stations competing in multi transmitter categories, to individual SO2R contesters and to major DX-peditions.
Unlike the “BPF” filters, the “BPF Luxury” are assembled according to the altered schematic at application of high-quality ferrites made by Micrometalls Co., what improves performance of the filters, particularly isolation between adjacent amateur bands.
The filters are installed between the transceiver and power amplifier, to cut off the interference from the radio emission on another band.

BPF Standart

High Power Low-pass filters

High Power low-pass filters is designed to solve difficult interference problems by suppressing out-of-band emission of radio transmitting devices operating in 10M band by adding a tremendous harmonics and hash attenuation, as well as the noise reduction to the electronic equipment (TVs, radios, etc.). It meant to be placed at the output of the amplifier or at the output of the antenna switch.
The filter is a passive inductive-capacitive Low Pass Filter constructed in a solid steel, polyester powder coated casing in light gray. For effective heat dissipation active cooling system is provided: the low-noise fan (80x80mm, 12Vdc @0.2 A) is installed on the one end and protected by a metal grid. The filter design is allows its installation directly on a wall or be placed on a rack, shelf, table, etc.

HPF RF-BC-1.8MHz

High-pass filter “RF-BC-1.8MHz” is designed to prevent receiver overloading by signals of MW Broadcast Radio Station. It must to be placed at the antenna input of the transceiver.
The filter is a multi-pole passive inductive-capacitive High Pass Filter, constructed in a solid aluminum casing.

The “Monoblock BPF-Luxury” is best choice for your shack!

 

The “Monoblock BPF-Luxury” (160, 80, 40, 20, 15 and 10 Meters) remotely controlled unit is designed for maximum operation convenience with a serious contest multi-operator station in mind!

It consists of six BPF-Luxury filters (BPF-1.8, BPF-3.5, BPF-7, BPF-14, BPF-21, BPF-28 for 1.8, 3.5, 7, 14, 21 and 28 MHz respectively) in one solid aluminum housing, coated in an electrostatic field with polyester powder, has dimensions of 370x300x140mm, and can be mounted on horizontal or vertical surface (underside of the case has a polymeric supports).

The kit includes an external control box, attached to the “Monoblock BPF-Luxury” by a 3-meter cable with DB9 connectors.

“MiniBlock BPF” – your choice for DX-pedition and field day!

 

The “Miniblock BPF” (160, 80, 40, 20, 15 and 10 Meters) is designed for maximum operation convenience with a serious contest multi-operator station in mind! It is also popular in DXpeditions and field days.

It consists of six Band-Pass filters for 1.8, 3.5, 7, 14, 21 and 28 MHz in one solid aluminum housing, coated in an electrostatic field with polyester powder, has dimensions of 250x250x50mm, and can be mounted on horizontal surface (underside of the case has a polymeric supports).